12 Introduction to the manual
Categorization by frame size and option code
The frame size identifies information which concerns only a certain frame size of the
drive. The frame size is shown on the type designation label. All frame sizes are listed
in the technical data.
The option code (A123) identifies information which concerns only a certain optional
selection. The options included in the drive are listed on the type designation label.
Use of component designations
Some device names in the manual include the component designation in brackets (for
example, [Q20]). This will help you to identify the components in the circuit diagrams
of the drive.
Quick installation flowchart
Task
Plan the electrical installation and acquire the ac-
cessories needed (cables, fuses, etc.).
Check the ratings, required coolant flow, and other
technical data.
Select the brake resistor (if custom resistor is used).
Examine the installation site.
Unpack and examine the drive (only intact units may
be started up).
Make sure that all necessary optional modules and
equipment are present and correct.
Fasten the cabinet and join cabinet sections togeth-
er.
Route the resistor cables (if customer resistor is
used).
Measure the insulation of the resistor circuit (if
customer resistor is used).
Connect the resistor cables and thermal switch (if
customer resistor is used).
Connect the control cables (if customer resistor is
used).
Check the installation.
See
Guidelines for planning the electrical installa-
tion (page 31)
Technical data (page 99)
Selecting the brake resistor (page 32)
ACS880 liquid-cooled multidrive cabinets mechan-
ical installation instructions
[English])
ACS880 liquid-cooled multidrive cabinets mechan-
ical installation instructions
[English])
If the drive has been non-operational for more than
one year, the DC link capacitors need to be re-
formed. See Capacitor reforming instructions
(3BFE64059629
[English]).
ACS880 liquid-cooled multidrive cabinets mechan-
ical installation instructions
[English])
Selecting and routing the brake resistor
cables (page 32)
Measuring the insulation resistance of the brake
resistor circuit (page 38)
Electrical installation (page 35)
Installation checklist (page 63)
(3AXD50000048635
(3AXD50000048635
(3AXD50000048635