Important Safety Information; Safety Standards; Safety Messages - ABB PCS6000 User Manual

2. Important safety information

Read this material carefully before working on or around the equipment. Failure to
do so can result in serious Injury or DEATH! Keep for future reference.

2.1. Safety standards

The following industry standards are observed:
– ANSI Z535.6
– ISO 3864-2
– ISO 7010
– EN 50110

2.2. Safety messages

The following safety messages are provided to help prevent personal injury and damage to
the equipment. The indicated hazard level is based on the ANSI Z535.6 standard.
This is the safety alert symbol. It is used to alert you to potential physical injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
DANGER
Indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
NOTICE
Is used to address practices not related to physical injury, but which can
result in equipment damage.
PRODUCT
PCS6000
DOCUMENT KIND
User manual
IMPORTANT SAFETY INFORMATION
DOCUMENT ID.
3BHS600000 E40
REV. LANG. PAGE
G en 19/114