Electrical Installation; Safety; Installation Planning And Execution - ABB PCS6000 User Manual

6. Electrical installation

6.1. Safety

All installation work must be carried out by qualified personnel according to the
site and equipment requirements and in compliance with local regulations.
DANGER
Handling live parts can result in DEATH or SERIOUS INJURY.
When located, installed, and connected in accordance with the instructions given
in this manual the device is safe.
▶ All installation work must be done in the absence of mains and auxiliary power.
▶ All circuit breakers and disconnectors must be open and secured with the
grounding switch closed.
▶ Adjoining grounding devices must be closed.
▶ All power cables must be grounded.
▶ Power must not be applied to the device without the consent of the authorized
commissioning staff.

6.2. Installation planning and execution

– See "Appendix A04 Operation and Interface Documents" for detailed information on
mechanical and electrical installation:
• 01 Control Interface and Operation Description
• 02 Mechanical and Electrical Interface
• 03 Cooling Interface
• 05 Communication Link Specification
– Refer to the outline drawing in "Appendix A02, Mechanical Drawings".
– Refer to the electrical circuit diagram in "Appendix A03, Electrical Drawings".
The installation includes the following items:
– Electrical installation instruction of MV connection, page 76
– Grounding the converter system, page 80
– Auxiliary connection, page 84
PRODUCT
PCS6000
Hazardous voltage!
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS600000 E40
ELECTRICAL INSTALLATION
REV. LANG. PAGE
G en 67/114