Reconnect The Library And The Host System - Spectra Logic Spectra 12000 Supplementary Manual

Reconnect the Library and the Host System

Return the Library to Service
1. Return the library to its normal operating location.
Warning:
The Spectra 12000 library and the Spectra 64000 library are heavy.
!
The Spectra 12000 library weighs about 275 lbs (124.74 kg).
!
The Spectra 64000 library weighs about 881 lbs (399.61 kg).
Get help when moving the library.
2. Switch on AC power at the rear of the library. The library now initializes and
becomes operational.
Caution:
If the host computer and/or other equipment was restarted while the
library was away, you must exit all programs and shut down all
equipment before reconnecting the library.
Configure the Library
1. Go to the Library Controller (Gator Control Panel). On the General Status screen, use
the stylus to tap Robotics.
46 60-Slot Segment Upgrade Guide
Figure 48 The General Status screen.