System - Strong SRT 8221 User Manual

Power Off Time
7.5 Option
Set up the options for languages.
OSD Language
Subtitle Language
Audio Language
Digital Audio
Audio Description
NOTE:

7.6 System

Setup some system own features for maintenance, network and protection.
Parental Guidance
Set password
Restore Factory Default Reset your receiver to the default factory settings. Sometimes useful if the
Information
Software Update
20
Enter the switch Off time with the numeric buttons on the remote control.
Use t u to select the language for the On-Screen Display.
Set your preference for the subtitle language priority, if available in broadcast.
Set your preference for the audio language priority, if available in broadcast.
Options are: Off, PCM, RAW HDMI On, RAW HDMI Off
PCM: All audio will be down mixed to a Stereo format on HDMI and S/PDIF
outputs.
RAW HDMI On: Raw audio information will be passed on to the HDMI
output, without down mixing to PCM Stereo, to be passed on to and
processed by a digital amplifier or home-theatre set to produce multi-
channel audio.
AD. Useful for the visual impaired. If you like to have support of an audio track
that describes the content on screen, select the volume from the AD audio
track. Default is Off.
Audio Description depends on the broadcaster inserting such an
accompanying audio track.
Programmes with a Parental Guidance Rating can be blocked from viewing
and opened only with a Password. To setup this feature, enter your password
first. Then select an age, above which the channel must be protected.
Options are: Off, 4 to 18. Default is Off.
To set another password enter the old 4-digit password first, then enter a
new password and confirm it, by entering it again.
unit suddenly behaves in an unexpected manner, e.g. after a power failure.
Select System then Restore Factory Default in the main menu and press OK to
select. Enter your password and press OK to confirm. Note: This option will
delete all your channels, Favourite lists and settings. The receiver will reboot
and start with the initial Installation menu.
This submenu shows receiver specific information such as hardware and
software version. Please have the Information screen on hand when you call
our hotline. The person who answers your call might ask for the information
given in this screen.
This feature allows you to update the receiver software via the USB port.
When a new software is available for your receiver, it can be downloaded
from our website. Place the software file (unzipped) in the root directory of
your USB storage device (HDD, memory stick etc.) and connect the device to
the USB port of the receiver. First a message box will appear that a USB device