Remote Control - Strong SRT 8221 User Manual

2. SAT IN
3. ETHERNET
4. S/PDIF Coaxial
5. HDMI
6. TV SCART
7. Power Cord

2.4 Remote Control

1. q
2. INFO
3. SLEEP
4. !
5. AUDIO
6. SUB
7. PG+/PG-
8. EPG
9. TEXT
10. MENU
11. EXIT
12. pq
13. t u
14. OK
15. GOTO
16. FAV
17. TV/R
18. RECALL
19. 0~9
20. 4
21. u
22. 2/TIMESHIFT
23. 5 6
24. 7 8
25. 3
26. COLOUR BUTTONS
27. ZOOM
28. ASPECT
29. V.F.
6
To connect to the LNB of your satellite dish for reception of
satellite broadcast signal
To connect your receiver to Ethernet LAN
To connect your receiver to a digital audio amplifier.
To connect your receiver with your TV set using a HDMI cable.
To connect your receiver with your TV set using a SCART cable.
Your receiver requires a voltage of 110~240 V AC (Auto-
selectable), 50/60 Hz +/-5%. Check the local power specification
before connecting your receiver to the wall outlet.
Turns the receiver On/Standby
Shows the current channel information
Press SLEEP repeatedly to select an automatic switch off time
Mutes audio output of the receiver
Sets the current audio channel to left, right or stereo
Shows list of subtitled languages
Page up/down and 10 channels steps in channel list mode
Shows the EPG (Electronic Programme Guide) in TV mode
Shows Teletext on OSD (On Screen Display)
Opens the main menu. In menu you will get one step back
Exits from the menu or sub-menu
Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific Menus
Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
While in playback, select a time to jump to.
Favourite group selection
Toggles between TV or RADIO mode
Display of the list of previously viewed channels
Channel selection or value input
Records the TV programme to the connected storage device
Start playback in Multimedia, Start Playback of Timeshift
Activates the Timeshift function
Fast rewind/Fast forward
Previous/Next item in Multimedia.
Stop playback in Multimedia, stop playback of Timeshift
For Editing in menu, Multimedia and Teletext functions.
Follow on screen suggestions.
Combined on coloured buttons:
Zoom in Multimedia Picture show.
Change aspect ratio of the video, default is Auto.
Change the video format of the video.
Fig. 3