Usb - Strong SRT 8221 User Manual

Network Setting

7.7 USB

Multimedia
This function allows playback of different kind of files from the connected USB storage device.
Select Music and press OK to playback MP3 files from your folders. Select Photo and press OK to view
your favourite pictures in JPG format. Select Movie and press OK to enter to play a number of video
formats. Select PVR and press OK, and select the HBPVR folder to show the recordings you've made.
The unit supports USB HDD devices with FAT32 format. However, it is possible to use already on a PC
formatted NTFS HDD device. Make sure your USB device is formatted correctly. Use the On-Screen
button suggestions and the multimedia buttons like RECALL (Return), u, 3 and 2 on the remote
control to work inside the multi media player.
{Photo Configure}
Slide Time
Slide Mode
Aspect Ratio
Movie Configure
Subtitle Specific
Subtitle BG
Subtitle FontColor
PVR Configure
Record Device
Disk
Timeshit Size
is found. Then go to the System menu and select the Software Update option.
Select the correct file in the list. Press OK to start update. When ready, the unit
will reboot automatically.
Setup your Network connection to use the Network Apps.
Link Type is LAN, for use with a wired network to a router/modem on the RJ45
Ethernet port.
IP Setting Press OK to open the submenu.
DHCP If DHCP is set to On, the unit will auto-negotiate with the router/
modem for the correct IP settings, assuming the router/modem also being
set to DHCP On. This is the common default. If you like to use different IP
settings, switch DHCP to Off and to Edit, press GREEN and enter the required
numbers. However, some technical knowledge about TCP/IP protocols is
required.
Setup your preferences for Photo viewing. Press u and photos will be shown
in an automatic slide mode.
Time between advancing to the next photo.
Many different modes can be used, for dissolving to the next photo, defined
by a number. Also, it is possible to select Random order to view the photos.
Choose between Keep and Discard.
For Subtitle used in the movie player, setup the features here.
Select either normal, big or small for Subtitle size.
Select the preferred colour of the Subtitle Background.
Select the preferred colour of the Subtitle characters.
For this option to work, you must have a USB device connected.
If your USB device should have more than 1 partition, select the one to use.
If the USB device has more than 1 partition, select the one you want to use.
Select the amount of free space to assign to the Timeshift function. The
default setting is 1 GB, which represents about 1 hour of video, depending on
the format and resolution of the video.
21