System Settings - Strong SRT 7008 User Manual

Edit:
Delete:
NOTE
7.5 Option
Press MENU and select Option. In this menu you can adjust the OSD Language, Subtitle Language,
Audio Language, Digital Audio mode.
Select an option and press tu to adjust the setting. Press  to exit the menu.
OSD Language:
Subtitle Language:
Audio Language:
Digital Audio:

7.6 System Settings

Press MENU and select System. The menu provides options to adjust the system settings.
Press p/q to select an option and press tu to adjust the setting. Press  to exit the menu. Some
menu items can only be entered by entering the password. Default is 0000.
Parental guidance
Set Password
Set or change the password for locked programmes and menu access. Enter your old password or
the default password '0000' . You will then be asked to enter your new password. To confirm, re-enter
your new password. After confirming, press  to exit the menu.
Restore Factory Default
Reset your receiver to the default factory settings.
Select Restore Factory Default in the main menu and press OK or u to select. Enter your password or
the default password '0000' and press OK to confirm. This option will delete all your channels and
settings. The receiver will reboot and start with the First Installation menu.
20
Press the GREEN button to edit an existing booking.
Press the BLUE button to delete a booking from the list. Press OK to confirm
deleting or  to cancel.
You can set timers for programmes directly from the EPG. Please refer to
section 6.8 for more details.
Select the preferred language for the On Screen Display.
Select the preferred subtitle language.
Select the preferred audio language for watching TV channels. If the
language is not available, the default programme language will be used
Select digital audio output mode. Settings affect both S/PDIF and HDMI
outputs.
PCM – audio from any format will be converted to PCM format
RAW – audio from receiver will be send in original format
RAW (HDMI On)- As RAW, but also affects the HDMI output.
OFF – digital audio output disabled
Set the age limit for a viewer, if the viewer is underage. This only functions if a
broadcaster sends an age-signalling for the current programme.