Table of Contents
Advertisement
If By Frequency is selected, use pqt u and 0 ~ 9 to select Frequency, Symbol Rate and select the correct ScanQAM
parameter. Highlight Search and press OK to start scanning. Newly found channels will be added to the channel list.
If Network Search is set to On, all channel belonging to the network of your operator will be found, according to NIT
information provided in the signal of the operator.
NOTE:
Obtain technical data about your cable-operator base channel from your operator and start a
network search from there to find all channels belonging to the network.
7.2.2 Auto Scan
Use pq to select Installation and press OK or u to advance.
Select Auto Scan with pq and press OK to enter.
Select your country and network base channel.
When FTA Only is set to Yes, scrambled channels won't be stored in the channel list. Use pq to highlight Search. Now
press OK to start auto scan.
The receiver will store all found channels in the channel list.
NOTE:
Obtain technical data about your cable-operator base channel from your operator and start a
network search from there to find all channels belonging to the network.
7.2.3 LCN (Logical Channel Numbering)
If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the operator, channels will be stored
in an operator defined order. Set LCN to On to activate operator defined channel numbering or Off to store channels in
found order. This function only applies when a new channel search is performed.
7.3 System Setup
This menu allows you to manage the system settings of your receiver. It consists of the following sub-menus: Language,
TV System, Local Time Setting, Timer Setting, Parental Lock, OSD Setting and Auto Standby.
Press pq to highlight the menu of choice and press OK advance to the next screen. Use pq to move the highlight to
the setting of choice. Values can be changed with t u. Press EXIT to leave.
7.3.1 Language
This menu allows you to set up your language preferences.
Language:
Use t u to select the language for the On Screen Display.
First Audio:
Use t u to select Audio language.
Second Audio:
Use t u to select a language that will be played when the language selected at First Audio isn't
available.
Subtitle Language:
Use t u to select the preferred subtitle language.
2nd Subtitle Language: Use t u to select the preferred 2nd subtitle language if the 1st preference is not available.
Teletext:
Use t u to select the preferred Teletext language (when available).
Subtitle:
Use t u to select the preferred subtitle type to be displayed automatically. Select Normal],
Hard of Hearing or Off*
* Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via Teletext if available.
7.3.2 TV System
Use this menu to match your receiver to your TV set. The following settings are available:
Video Resolution:
Use this option to select the video resolution of your TV screen. The options are: By Source
(automatic detection of video resolution offered to the receiver), By Native TV (automatic
detection of maximal resolution of TV screen), and manual selections 480i, 576i up to 1080p.
12
Advertisement
Table of Contents
