Rear Panel; Remote Control - Strong SRT 7015 Manual

2.3 Rear panel

1. SAT IN
2. HDMI
3. S/PDIF coaxial
4. Power connector

2.4 Remote Control

DIGITAL HD SATELLITE RECEIVER 7015
13/18 V
500 mA max.
SAT IN
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES.
DOLBY, DOLBY AUDIO AND THE DOUBLE-D SYMBOL ARE
TRADEMARKS OF DOLBY LABORATORIES LICENSING CORPORATION.
To connect to the LNB of your satellite dish for reception of satellite broadcast
signal
To connect to the HDMI input of your TV using a good quality HDMI cable
To connect to a digital or home cinema audio amplifier
The receiver requires a wall adapter, mains voltage input 100~240V AC 50~60Hz
12V, 1.5A DC output. Please check the local power conditions before connecting
the receiver to the mains supply.
Supplied by STRONG Austria
COAXIAL
S/PDIF
8
Fig. 2
Fig. 3