Removing And Installing Trim For Head Restraint Adjuster - Volkswagen Transporter 2016 Workshop Manual

Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
– Unclip catches of caps -2- and -3- from belt guide -1- and re‐
move caps.
– Unscrew bolts -4- and -5- of belt guide -1-.
– Pull belt guide -3- off head restraint adjuster -2-.
– Pull head restraint -1- out of head restraint adjuster -2-.
Installing
Install in reverse order of removal, observing the following:
– Before installing, check all fasteners for damage and renew as
necessary.
Specified torques
Component
Bolt for belt guide
4.6 Removing and installing trim for head
restraint adjuster
Special tools and workshop equipment required
408
Rep. gr.72 - Seat frames
Specified torque
8.0 Nm