Table of Contents
Advertisement
– Roll cover -1- upwards.
– Cut through and remove upholstery clips -4-.
Note
The upholstery clips -4- are damaged beyond repair during removal and must therefore be renewed during
installation.
– Remove cover -1- and padding -2- from backrest frame -3-.
Note
Before installing, check all fasteners for damage and renew if necessary.
♦
Always renew clips. The part numbers of the clips can be found in the ⇒ Electronic Parts Catalogue (ETKA) .
♦
Attach clips using upholstery clip pliers - V.A.G 1634B- .
♦
To aid installation, heat up cover to approx. 30°C.
♦
General body repairs, interior - Edition 03.2020
2. Rear seat covers and padding
Transporter 2016 ➤
483
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
