Volkswagen Transporter 2016 Workshop Manual page 91

6.5 Table module in seat rails, removing and installing cup holder
Removing
Note
Removal and installation is described for the front drink holder in the carrier plate. Apply the same instructions
for removal and installation of the rear drink holder in the carrier plate as appropriate.
– Remove table module
– Move table to uppermost position.
– Turn table top 90°.
– Remove table top ⇒ page 82
– Push down 2 retaining lugs -arrows- and pull out cup holder
-2- from carrier plate -1-.
Installing
Install in reverse order of removal, observing the following:
– Before installing, check position of both guides. Retaining tabs
may need to be bent up slightly.
⇒ page 80 .
.
General body repairs, interior - Edition 03.2020
6. Table modules, Multivan/Business
Transporter 2016 ➤
83