Volkswagen Transporter 2016 Workshop Manual page 291

Continuation for all vehicles
– Unscrew bolts -1-.
– Remove grab handle (roof) at front
– Pull moulded headliner in front seat area towards side out of
vehicle.
Installing
Install in reverse order of removal, observing the following:
Note
The replacement part is supplied with holes punched out for
♦
the standard equipment. However, no provision is made for
cut-outs for vehicle-specific installations. Any cut-outs re‐
quired for the specific vehicle must be cut using, for example,
the electric cutter - V.A.G 1561A- .
Make cut-outs for microphone in new moulded headliner
♦
slightly smaller.
General body repairs, interior - Edition 03.2020
⇒ page 50 .
Transporter 2016 ➤
7. Roof trims
283