Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
9
Airbag crash sensors
WARNING
If the vehicle has been converted by ABT e-Line, it is possible
that the repair instructions provided below are no longer valid.
• In this case, please always refer to the repair instructions
from ABT e-Line, available in ElsaPro in the tab "Super‐
structures and modifications".
⇒ "9.1 Overview of fitting locations - airbag crash sensors", page
172
⇒ "9.2 Removing and installing side airbag crash sensors on driv‐
er side G179 / G180 ", page 173
⇒ "9.3 Removing and installing rear side airbag crash sensors on
driver side G256 / G257 ", page 174
9.1
Overview of fitting locations - airbag crash sensors
1 - Side airbag crash sensor on
driver side - G179- / -G180-
❑ Installed under chrome
strip of front left and
front right doors
❑ Removing and installing
⇒ page 173
2 - Bolt
❑ 9 Nm
3 - Rear side airbag crash sen‐
sor, driver side - G256-
❑ Fitting location: on rear
wheel housing
❑ Removing and installing
⇒ page 174
4 - Bolt
❑ 9 Nm
5 - Rear side airbag crash sen‐
sor, front passenger side -
G257-
❑ Fitting location: under
chrome strip of sliding
door
❑ Removing and installing
⇒ page 174
6 - Bolt
❑ 9 Nm
172
Rep. gr.69 - Passenger protection