Removing And Installing Moulded Headlining - Volkswagen Transporter 2016 Workshop Manual

Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
7.3 Removing and installing moulded head‐
lining
⇒ "7.3.1 Removing and installing moulded headliner, passenger
compartment", page 280
⇒ "7.3.2 Removing and installing moulded headliner, driver area",
page 281
7.3.1 Removing and installing moulded head‐
liner, passenger compartment
Note
The removal and installation procedures may have to be modified
slightly depending on model variants.
Special tools and workshop equipment required
♦ Release lever - T10039-
♦ Torque wrench - V.A.G 1783-
Note
Removal and installation is described for the Multivan. Follow
same instructions for the Transporter as appropriate.
Removing
– Remove centre interior lights ⇒ Electrical system; Rep. gr.
96 ; Lights; Overview of fitting locations - lights in roof trim .
– Remove rear interior lights ⇒ Electrical system; Rep. gr. 96 ;
Lights; Overview of fitting locations - lights in roof trim .
– Remove grab handles on B-pillars.
280
Rep. gr.70 - Trim, insulation