Volkswagen Transporter 2016 Workshop Manual page 413

Removing
Note
If the outer armrests have to be removed, the bench seat must first be removed
♦
If the inner armrests have to be removed, it is sufficient to move both backrests in a position which allows
♦
for removal of the armrests.
Cap -2- cannot be removed without being damaged.
♦
– Drill a hole right into the "perforation" of cap -2- using a 2 mm
drill -4-.
– Using drift -3- lever off cap -2- in -direction of arrow- and re‐
move it from armrest -1-.
– Unscrew bolt -2-.
– Remove armrest -1- from seat frame pin -4-.
– Remove spacer ring -3- from seat frame pin -4-.
General body repairs, interior - Edition 03.2020
Transporter 2016 ➤
⇒ page 396 .
4. Rear seats, Business
405