Volkswagen Transporter 2016 Workshop Manual page 333

Note
Before installing, push spacer ring -4- in adjuster knob for backrest adjustment.
– Press off adjuster knob for lumbar support -2- using removal
pliers - 3392- .
– Pull out right trim -1- from mountings in seat frame.
– Pull out left trim -5- from mountings in seat frame.
Installing
Installation is carried out in reverse order.
2.11.4 Removing and installing seat trim on sill
side, electrically adjustable seat
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1783-
Removing
Note
Removal and installation is described for the left vehicle side.
Follow same instructions for the right side as appropriate.
– Adjust seat to fully upright position.
– Unscrew bolt -2-.
– Remove front seat trim -1- from bracket.
– Unscrew bolt -3-.
– Unclip clip -5-.
– Remove seat trim -4- from bracket.
– Disconnect electrical connectors.
Installing
Install in reverse order of removal, observing the following:
♦ ⇒ "2.5 Assembly overview - seat pan", page 296
General body repairs, interior - Edition 03.2020
Transporter 2016 ➤
2. Front seats
325