Removing And Installing Radio/Navigation System Mounting Frame; Removing And Installing Mounting Frame Of Operating Unit Of Heater And Air Conditioning; Unit - Volkswagen Transporter 2016 Workshop Manual

– Unscrew bolt -2-.
– Remove light switch trim -1- from dash panel cover.
Installing
Install in reverse order of removal, observing the following:
Specified torques
♦ ⇒ "3.1 Assembly overview - dash panel", page 196
3.8 Removing and installing radio/naviga‐
tion system mounting frame
Special tools and workshop equipment required
♦ Release lever - T10039-
Removing
– Using wedge - T10039/1- , unclip mounting frame -1- in
-direction of arrow- from catches.
Installing
– Fit radio/navigation system installation frame in installation
position and press it on until catches can be heard to engage.
3.9 Removing and installing mounting frame
of operating unit of heater and air con‐
ditioning unit
Special tools and workshop equipment required
General body repairs, interior - Edition 03.2020
Transporter 2016 ➤
3. Dash panel
205