Removing And Installing Fastening Rings - Volkswagen Transporter 2016 Workshop Manual

Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
Specified torques
Component
Bolt for cover
6.8

Removing and installing fastening rings

⇒ "6.8.1 Removing and installing fastening ring, Multivan, fasten‐
ing ring in area of C-pillar", page 270
⇒ "6.8.2 Removing and installing fastening ring, Multivan, fasten‐
ing rings in seat rails", page 272
⇒ "6.8.3 Removing and installing fastening ring, Transporter, fas‐
tening ring in area of C-pillar", page 272
⇒ "6.8.4 Removing and installing fastening ring, Kombi and panel
van with floor covering", page 273
⇒ "6.8.5 Removing and installing fastening ring, Kombi and panel
van without floor covering", page 275
6.8.1 Removing and installing fastening ring,
Multivan, fastening ring in area of C-pil‐
lar
Removal and installation is described for one fastening ring. Re‐
moval and installation of the remaining fastening rings of the
same type is analogous.
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1331-
270
Rep. gr.70 - Trim, insulation
Specified torque
1.8 Nm