Removing
– Using wedge - T10039/1- and starting at position -2-, unclip
trim panel -1- in -direction of arrow- from catches.
Installing
– Fit trim panel in installation position, and press it on until catch‐
es can be heard to engage.
3.5
Removing and installing dash panel in‐
sert trim
Special tools and workshop equipment required
♦ Front end hook - 3370-
Removing
– Remove mounting frame for radio/navigation system
⇒ page 205
.
– Remove gap cover on dash panel insert
– Remove dash panel vent on driver side
– Using front end hook - 3370- , unclip trim -1- in
-direction of arrow- on both sides.
Installing
– Fit dash panel insert trim in installation position, and press it
on until catches can be heard to engage.
3.6
Removing and installing loudspeaker
trim
Special tools and workshop equipment required
General body repairs, interior - Edition 03.2020
⇒ page 29
.
⇒ page 213
.
Transporter 2016 ➤
3. Dash panel
203