Removing And Installing Central Tube For Dash Panel - Volkswagen Transporter 2016 Workshop Manual

Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
16 - Central tube for dash panel
❑ Removing and installing
17 - Lateral bracket securing dash panel cross member
18 - Bolts
❑ Qty. 3
❑ 20 Nm
4.2 Removing and installing central tube for
dash panel
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1331-
♦ Torque wrench - V.A.G 1783-
Note
If electrical wires are disconnected or removed and installed, it is
useful to make corresponding drawings or photos. This guaran‐
tees that everything is re-installed in its original position.
Removing
– Remove left plenum chamber cover ⇒ General body repairs,
exterior; Rep. gr. 50 ; Bulkhead; Removing and installing ple‐
num chamber cover .
220
Rep. gr.70 - Trim, insulation
⇒ page 220