Step 4
Draw detection rule.
1) Click
stop drawing.
2) Configure parameters.
Parameter
Name
Sensitivity
3) Click OK.
Step 5
Configure alarm schedule and linkage.
1) Click
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
● On the time line, drag to set the period.
● You can also click
3)
Configure alarm linkage. For details, see Table 5-50.
4) Click Apply.
Step 6
Click Apply.
5.9.8.2.4 People No. Exception Detection
When the system detects an abnormal number of people in the same detection area, an alarm will
be triggered.
Procedure
Step 1
Select Main Menu > AI > Parameters > Stereo Analysis.
Step 2
Select a channel and then click Add.
Step 3
Select Enable and then set Type to People No. Exception Detection.
Step 4
Draw detection rule.
1) Click
stop drawing.
2) Configure parameters.
, and then draw a detection area on the video image. Right-click the image to
Table 5-43 Parameters of violence detection
Description
Customize the rule name.
Set alarm sensitivity.
Figure 5-161 Schedule and alarm linkage
.
to set the period.
, and then draw a detection area on the video image. Right-click the image to
268
User's Manual