Abilica Mill 30 Manual page 62

1.8 PULSE FUNCTION
User need to wear chest belt for detecting the heart rate. This data is only for
reference and can not be used as medical purpose.
1.9 MANUAL MODE OPERATION
1.9.1 After pressing "START" button, time countdowns for 3 seconds and then
treadmill starts to work at initial speed 0.8km/h
1.9.2 Press "SPEED QUICK" buttons or rotate "SPEED WHEEL QUICK" button on the right
handlebar in order to adjust the speed.
1.9.3 Press "INCLINE QUICK" button or rotate "INCLINE WHEEL QUICK" button on the
left handlebar in order to adjust the incline.
1.9.4 Press "STOP" button, the treadmill stops from running state.
(1) When pressing "STOP" button for 1 time, the treadmill is in PAUSE. The data in all
st
windows will be accumulated from previous paused training once pressing "START"
button to resume running. The speed starts from 0.8 km/h and incline starts from level
0.
(2) When pressing "STOP" button again when treadmill is in PAUSE, treadmill stops and
all data will be cleared to 0.
1.10 PARAMETER DATA FOR COUNTDOWN MODES
Countdown modes can be switched in below sequence: Time Countdown mode→
Distance Countdown mode→ Calories Countdown mode. The correspond display
flashes when you choose different mode.
1.10.1 Time Countdown: initial setting is 30:00 minutes. Setting range is from 5:00 to
99:00 minutes. Each adjustment is 1:00 minute.
1.10.2 Distance Countdown: initial setting 1.0 km. Setting range is from 0.5 km to 99.9
62