Abilica Mill 30 Manual page 60

1.6 BUTTON FUNCTION
1.6.1 START/STOP (PAUSE)
START: When the treadmill is not running, press this button to start the treadmill. The
initial speed is 0.8 km/h.
STOP (PAUSE): When the treadmill is running, press this button to pause the treadmill.
The data in all windows will be accumulated from previous paused training once
pressing "START" button to resume running. Press "STOP" button again when treadmill
is in PAUSE, treadmill stops and all data will be cleared to 0.
1.6.2 "PROGRAM" BUTTON
When the treadmill is not running, press this button to switch to different programs in
below sequence: Preset programs P01 – P12 → User programs U01 – U03 → HRC
programs HP1 – HP3 → Body Fat program (FAT) → Manual mode.
1.6.3 "MODE" BUTTON
When the treadmill is not running, press this button to choose different countdown
modes in below sequence: Time Countdown mode → Distance Countdown mode →
Calories Countdown mode.
1.6.4 SPEED QUICK BUTTON
Press the speed quick button to quickly adjust speed to 5km/h, 10km/h, or 15km/h
when the treadmill is running.
1.6.5 INCLINE QUICK BUTTON
Press the incline quick button to quickly adjust incline to level 4, level 8, or level 12
when the treadmill is running.
1.6.6 SPEED WHEEL QUICK BUTTON
Wheel quick button on the right handlebar switches the range of speed adjustment
to 0.1 or 1km/h. Increase the speed by rotating wheel forward; decrease the speed
by rotating wheel back.
60