Abilica Mill 30 Manual page 13

STEP 5
Rotate the Console Monitor (B1) to a comfortable reading angle. Then lock the Smartphone
Holder (B94) on either side of water bottle holders. Finally, plug in the Power Cable (C15) and
Safety Key (C13).
STEP 6
After installation, press start button and adjust speed to 3km/h or below. Then check the
running belt to see if it runs smoothly. The tightness level of running belt is decided based on
the situation of slippery and deviation (Please refer to "MAINTENANCE INSTRUCTIONS "). After
checking is completed, move treadmill to appropriate location for exercising use.
13