Flasher Pack Replacement; Figure 7-40. Removing And Replacing The Flasher Pack - Thermo Scientific 43iQTL Instruction Manual

Flasher Pack
Replacement
Thermo Scientific
Use the following procedure to replace the flasher pack.
Equipment required:
Hex drive, 1/16
1. Unplug flash trig from board.
2. Loosen 6-32 set screw until the flasher pack/lamp can be eased out of
housing.
Figure 7–40. Removing and Replacing the Flasher Pack
Servicing
DMC Optical Bench Removal
43iQTL Instruction Manual 7-37