Thermo Scientific 43iQTL Instruction Manual page 219

Servicing
DMC Optical Bench Removal
Photo Lamp
Use the following procedure to remove and replace the photo lamp
detector board.
Detector Board
Replacement
Equipment required:
Phillips drive, #1 and #2
1. Unplug cable.
2. Using #2 Phillips drive, unfasten three #6-32 pan head screws.
Figure 7–42. Replacing the Photo Lamp Detector Board pt 1
3. Pull detector cover outwards.
4. Unfasten four 4-40 screws.
5. Pull photo lamp detector board outwards.
6. Replace lamp detector board and assemble in reverse order.
7-39
Thermo Scientific 43iQTL Instruction Manual