Canon Colorado 1650 Operation Manual page 135

10. Lift up the tension bar and place it correctly on top of the media.
11. On the operator panel tap on [Ready].
12. Move the media guides towards the middle to align with the media. Tap on [Ready].
The printer starts printing while winding the job. Make sure the tension bar falls into the locked
position.
After you finish
When you want to stop winding you have to cut the media. For more information, see
media on page Cut the media (manual) on page
150,
Print and wind with a locked tension bar
152.
Chapter 4 - Handle the media
Cut the
135