Canon Colorado 1650 Operation Manual page 93

6. Accurately align the roll on the media shaft. Place it on the corresponding media size with the
help of the ruler. Check on the left and right side of the roll if both are aligned on the same size.
7. Release the handle of the locking mechanism.
8. Remove the tapes from the new media roll, if present.
Place the media roll in the media drawer.
9. Close the clamp firmly.
IMPORTANT
Make sure you close the clamp completely until you hear a click, otherwise the roll can
come loose and can damage the machine.
Load a media roll (position 2)
Chapter 4 - Handle the media 93