User’s Guide QT5-0546-V05...
Canon CarePAK Extended Service Plan is a cost-attractive and easy-to-use extended service program that provides up to three full years of service and sup- port coverage at a very attractive price. CarePAK offers toll-free Canon technical support and includes Canon’s superb InstantExchange product replacement pro- gram.
Disclaimer Canon Inc. has reviewed this manual thoroughly in order that it will be an easy-to-use guide to your Canon MP180/MP160. All statements, technical information and recommendations in this manual and in any guides or related documents are believed reliable, but the accuracy and completeness thereof are not guaranteed or warranted, and they are not intended to be, nor should they be understood to be, representation or warranties concerning the products described.
Uninstalling The On-screen Manual ... 111 Transporting The Machine... 112 Specifications ... 113 Regulatory Information... 117 FCC Notice (U.S.A. Only)... 117 Canon U.S.A., INC. LIMITED WARRANTY (USA Only)... 118 Users In Canada ... 121 Customer Technical Supports ... 121 Index... 122...
If you detect smoke, unusual smells or strange noises around the machine, immediately unplug the machine at the power supply and contact your local authorized Canon dealer or the Canon help line. Using the machine in such conditions may result in fire or electrical shock.
If these items are dropped or spilled in the machine, turn OFF the power and unplug the power cord immediately with dry hands. Then contact your local authorized Canon dealer or the Canon help line.
Power supply Never remove the plug by pulling on the cord. Pulling on the power cord may damage the cord and cause a fire or electrical shock. When turning OFF the power, be sure to press [ON/OFF] or unplug the machine. However, if the machine is unplugged during printing, the FINE Cartridge is not protected with the cap that prevents the ink from drying.
Containers of water or other liquids such as glasses, vases, or pot plants If water does spill inside the machine, turn OFF the power immediately by pressing the [ON/ OFF], and disconnect the power cord. Then, contact your local authorized Canon dealer or the Canon help line.
FINE Cartridges (Ink For safety reasons, store FINE Cartridges (Ink Cartridges) out of the reach of small Cartridges) children. If a child ingests any ink, consult a doctor immediately. Do not shake FINE Cartridges (Ink Cartridges). Ink may leak out and stain clothing or the surrounding area. Never touch the nozzle and the gold terminal.
Reading The Document Symbols Used In This Guide Please read the list below of symbols used in this guide. The following symbols are used to indicate important instructions. Be sure to obey these instructions. Indicates a warning concerning operations that may lead to death or Warning injury to persons if not performed correctly.
Legal Limitations On Use Of Your Product And Use Of Images It may be unlawful to make copies of, scan, print or use reproductions of the following documents. The list provided is non-exhaustive. When in doubt, check with a legal representative in your jurisdiction.
Chapter 1 Before Printing Machine Parts And Their Functions This section provides the name and location of the main components of this machine, and also describes their functions. Machine Exterior (1) Document Cover Covers the Platen Glass. Open this cover when loading a document on the Platen Glass. (2) Paper Support Supports paper loaded in the Auto Sheet Feeder.
Rear view and interior (10) (16) (10) FINE Cartridge Holder Install the FINE Cartridges here. (11) FINE Cartridges (Ink Cartridges) Replaceable cartridge that comprises an integrated Print Head and ink tank. FINE Cartridges are available in two types, Color (on the right) and Black (on the left). (12) Scanning Unit Used to scan a document.
Operation Panel This section describes the buttons on the Operation Panel, and their functions and locations. (1) [Photo Index Sheet] Button Switches the machine to Photo Index Sheet mode. (2) [COPY] Button Switches the machine to copy mode. (3) [SCAN] Button Switches the machine to scan mode.
(1) (2) (3) (4) (5) (1) [ (Maintenance)] Button Accesses the Maintenance menu. (2) [Fit to Page] Button Enables/disables the Fit-to-Page copying. (3) Fit-to-Page Lamp Lights when Fit-to-Page copying is enabled. (4) [SCAN] Button Opens the MP Navigator to scan a document to your computer according to the settings selected.
Turning The Machine ON/OFF Press [ON/OFF] to turn the machine ON and OFF. Before turning ON the machine, make sure the Document Cover is closed. Important Note Before Printing Always press [ON/OFF] before disconnecting the power cord. This ensures the FINE Cartridge is covered to prevent it from drying out. If the machine is not used for an extended period of time, we recommend making black &...
Setting Documents Document Requirements The documents you load on the Platen Glass for copying or scanning must meet these requirements: Document All types of paper documents Type Photographs Books, catalogs or magazines Size (W x L) Max. 8 Thickness Max. Loading Documents To copy or scan a document, set it on the Platen Glass.
Place the paper back into its packet when not using it, and store out of direct sunlight in a place where the temperature and humidity are low. If the printed area is traced with a highlight pen or paint-stick or stained with water or sweat, ink may blur. Before Printing ) other than genuine Canon paper Chapter 1...
Plain paper Approx. 100 sheets (17 lb. or 64 g/m Envelopes Approx. 10 envelopes Canon Genuine Media Canon recommends that you use genuine Canon paper to insure optimal print quality. Paper Type Model Super White Paper SW-201 High Resolution HR-101N Approx. 80 sheets...
We do not recommend using plain paper for photo printing. Printing from your You may be able to load other computer envelopes, but Canon cannot guarantee consistent performance. Do not use the following types of envelopes since they may cause...
Canon Genuine Media Canon recommends that you use genuine Canon paper to insure optimal print quality. Paper Type Size High Letter (8 1/2 in. x 11 in./ Resolution 215.9 mm x 279.4 mm) Paper A4 (8 1/4 in. x 11 3/4 in./...
Paper Type Size Photo Paper Letter (8 1/2 in. x 11 in./ Plus Double 215.9 mm x 279.4 mm) Sided A4 (8 1/4 in. x 11 3/4 in./ 210 mm x 297 mm) 5" x 7" (5 in. x 7 in./ 127.0 mm x 177.8 mm) Photo Paper Letter (8 1/2 in.
Paper Type Size Photo Paper Letter (8 1/2 in. x 11 in./ 215.9 mm x 279.4 mm) A4 (8 1/4 in. x 11 3/4 in./ 210 mm x 297 mm) 4" x 6" (4 in. x 6 in./ 101.6 mm x 152.4 mm) Wide (4 in.
Paper Type Size T-Shirt A4 (8 1/4 in. x 11 3/4 in./ Transfers 210 mm x 297 mm) Photo Paper Pro Guidelines Do not touch the print surface until the ink is dry (approx. 30 minutes). Colors in dark images may appear indistinct at first, but will become clearer after approx.
Loading Paper Loading Paper Follow this procedure: Open the Paper Support (1), then pull out the Paper Support Extension (2). Place a stack of paper (print side up) in the Auto Sheet Feeder (1), pinch the Paper Guide (A) and adjust it to the left side of the stack (2). Set the Paper Thickness Lever to the correct position for the paper.
Loading Envelopes Follow this procedure: Open the Paper Support, then pull out the Paper Support Extension. Prepare the envelopes for loading. Important Before Printing Press down firmly on the edges of the envelopes to make the folds crisp. Also, press firmly on the area that corresponds to the edges of the back flap.
Place the stack of envelopes (print side up) in the Auto Sheet Feeder (1), pinch the Paper Guide (A) and adjust it to the left side of the stack (2). Load the envelopes in the Auto Sheet Feeder with the short side down. Set the Paper Thickness Lever to the right.
Chapter 2 Copying Making Copies This section describes the basic procedure to make copies. Load the paper in the Auto Sheet Feeder. For details on paper, see page 17. Note Press [COPY]. Use [ ] or [ ] to select the number of copies (max. 99 copies). 100% PLAIN For the maximum load limit for the paper you are using in the Auto Sheet...
Load the paper in the Auto Sheet Feeder. (See page 23) Press [+] repeatedly to select the number of copies (max. 20 copies). By pressing [+] repeatedly, <F> will be displayed. The number of copies Note will be set as 20. Press [Paper] repeatedly to select the paper size and type.
PLAIN PAPER/PHOTO PAPER PRO/PHOTO PAPER PLUS/MATTE PHOTO PAPR/ GLOSSY In order to obtain optimal quality print results, when copying photographs, Note use Canon-recommended Photo Paper Pro or Photo Paper Plus Glossy. For details on paper, see page 17. Press [OK]. Copying >on the LCD indicates the current setting.
Adjusting Image Quality You can adjust the image quality according to the document to be copied. Follow this procedure: Press [COPY]. Press [Menu] repeatedly until <IMAGE QUALITY> appears. 5.IMAGE QUALITY STANDARD Use [ ] or [ ] to select the image quality. <STANDARD>: Suitable for text-only documents.
Reducing Or Enlarging A Copy You can reduce or enlarge copies using three different methods: Preset copy ratios You can select one of the preset ratios to reduce or enlarge copies. Custom copy ratios You can specify the copy ratio as a percentage to reduce or enlarge (Zoom) copies.
Using Custom Copy Ratios (Zoom) In addition to making reduction and enlargement decisions using preset copy ratios, you can use customized 1% increments. Follow this procedure: Press [COPY]. Press [Menu] repeatedly until <ENLARGE/REDUCE> appears. Use [ ] or [ ] to select <ZOOM>. 1.ENLARGE/REDUCE ZOOM Press [OK].
The following section describes how to use this feature. Sticker Copying You can easily make 16 stickers from 4" x 6" (101.6 x 152.4 mm) photos or graphics using Canon sticker paper. (1) Platen Glass (Place document face down) (2) 16 stickers Follow this procedure: Load one sheet of stickers in the Auto Sheet Feeder.
Note Borderless Copying This feature enables you to copy the images so that they fill the entire page without borders. Note Follow this procedure: Load the paper in the Auto Sheet Feeder. Press [COPY]. Use [ ] or [ ] to select the number of copies (max. 99 copies). Adjust the settings for your document as necessary.
PHOTO PRO/PHOTO PLUS/MATTE PHOTO/GLOSSY Load the document on the Platen Glass. Press [Color] for color copying, or press [Black] for black & white copying. Repeating An Image On A Page (Image Repeat) This feature enables you to copy an image multiple times onto a single page. You can set the machine to automatically select the number of times it repeats the image, or you can specify the number.
Press [Color] for color copying, or press [Black] for black & white copying. Important Note Fit-to-Page Copying (MP160) This feature enables you to copy images so that they are automatically reduced or enlarged to fit the paper size you select. Follow this procedure: Load the paper in the Auto Sheet Feeder.
Chapter 3 Printing From A Memory Card (MP180) Using A Memory Card Let’s take a look at different types of memory cards and how to insert and remove them. Memory Cards Supported By This Machine Supported memory cards are as follows: Memory Cards which can be inserted directly Memory Cards which can be used through a special adapter Purchase a CompactFlash Card Adapter for xD-Picture Card separately.
This machine accepts images taken with a camera compatible with the Important Design rule for Camera File system (Exif 2.21 compliant) and DPOF (Ver. 1.00 compliant). Photos stored in a memory card not supported by the digital camera may fail to load or be damaged.
Install the memory card in the appropriate Card Slot. Type of card CompactFlash (CF) Card Microdrive xD-Picture Card* Install these cards into the left card slot. SmartMedia Card Install this card into the right card slot. MEMORY STICK MEMORY STICK PRO MEMORY STICK DUO* MEMORY STICK PRO DUO*...
Printing Photograph Printing By Using The Photo Index Sheet With this machine, you can easily print photographs using a Photo Index Sheet, by filling in the appropriate circles to select print options and photographs you want to print. Simply scanning a Photo Index Sheet prints the selected photographs according to the selections you have made.
Use [ ] or [ ] to select the range of photographs to print on the Photo Index Sheet. <PRINT ALL PHOTOS>: Prints all image data stored on the memory card. <LAST PHOTO>: <SELECT RANGE>: If you select <PRINT ALL PHOTOS>: Go to step 7.
Press [OK]. INDX PRINTING The machine prints the Photo Index Sheets. If more than 37 photographs are to be printed, the machine prints them Note on more than one Photo Index Sheet. (1) Select the paper size and type. (2) Select date printing as necessary. (3) Mark this to print one copy of each photograph.
Fill in the appropriate circles ( to print and print settings. Good (1) Check mark (2) Line only (3) Light Important Load the paper selected on the Photo Index Sheet in the Auto Sheet Feeder. When printing image data using a Photo Index Sheet, you can select Note 8.5"...
Press [OK]. The machine reads the Photo Index Sheet, and prints photographs according to the settings. Important Note Print Index You can print an index of all photos saved in the memory card on what is known as an index print.
Print All Photos You can print all photos saved on a memory card. Turn ON the machine and load the paper in the Auto Sheet Feeder. Insert the memory card into the Card Slot. See “Inserting A Memory Card” on page 37. Press [MEMORY CARD] and then press [Menu].
Printing A Range Of Photos You can print a range of photos in sequence on a memory card. To select the photos to print, first print the index and note the photo numbers assigned to them. You can also print a range of photos according to the shooting dates of photos you select.
Printing On Stickers - Sticker Print You can print your favorite photos on Canon sticker paper. Turn ON the machine and load a sheet of stickers in the Auto Sheet Feeder. You can load only one sheet of stickers at a time.
DPOF Print If DPOF (Digital Print Order Format) settings are made on the camera, photos are printed automatically according to those settings. Note Turn ON the machine and load the paper in the Auto Sheet Feeder. Insert the memory card containing the DPOF information into the Card Slot. See “Inserting A Memory Card”...
Print Settings This section describes the print settings you can change in Memory Card Mode, such as paper size, paper type or print quality. The settings below appear on the LCD when you press [Menu] repeatedly in Memory Card Mode. Depending on the functions you use, some setting items cannot be specified in Note combination.
Chapter 4 Reading From And Writing To A Memory Card (MP180) Setting Up The Card Slot As The Memory Card Drive Of The Computer Connecting the machine to a computer results in the memory card drive (removable hard disk) being displayed under [My Computer].
The Card Slot is used only for reading. Be sure to select this mode when printing photos from a memory card. OFF: The Card Slot is used as the memory card drive of the computer. Photo data can be written into the memory card. Important To change the write protect setting while a card is inserted in the Card Note...
Chapter 5 Printing From Your Computer This chapter describes the basic printing procedure, taking the steps to print documents as an example. Printing With Windows Menu and command names may differ between software applications, and Note more steps may be required. For details, refer to the documentation for each software application you use.
Specify the required settings. (1) Click [Media Type] to select the type of media loaded in the machine (1). (2) Specify the print quality and other settings in [Print Quality] or [Color/Intensity] (2). For print settings, see the On-screen Manual. Note (3) Click [OK] (3).
Chapter 5 You can cancel a print job in progress by simply pressing [Stop/Reset] on the machine. Click [Cancel Printing] on [Canon IJ Status Monitor] to stop printing. To show [Canon IJ Status Monitor], click [Canon MP180 Printer] on the taskbar.
Printing With Macintosh Menu and command names may differ between software applications, and Note more steps may be required. For details, refer to the documentation for each software application you use. The steps described in this section are for printing in Mac OS X v.10.4.x. Press [ON/OFF] to turn ON the machine.
Specify the required settings. (1) Select [Print] from the application software's [File] menu. The [Print] dialog box opens. (2) Select [Quality & Media] from the pop-up menu (1). (3) Select the desired media type from [Media Type] (2). (4) Select the print mode appropriate to your document from [Print Mode] (3). Note Chapter 5 When you select the print mode appropriate to your document from...
Print the document. (1) Click [Print]. Note Printing From Your Computer You can cancel a print job in progress by simply pressing [Stop/Reset] on the machine. Double-clicking the name of your machine in the [Printer List] of the [Printer Setup Utility] (When using Mac OS X v.10.2.8, double-clicking the name of your machine in the [Printer List] of the [Print Center]) displays a dialog that prompts you to confirm the status of the print job.
MP Navigator, see the Scanning Guide. On the Windows desktop, double-click the [MP Navigator 3.0] icon to open the MP Navigator. On the [Go] menu, select [Applications], [Canon Utilities], then double-click the [MP Navigator 3.0] icon to open the MP Navigator.
Scanning With The Operation Panel Of The Machine With the operation panel of the machine, you can open the MP Navigator and change the settings for the scanning operations. (See the Scanning Guide) If you are using Windows XP The program selection screen is displayed the first time you press [Black] / [Color] (MP180) or [SCAN] (MP160) on the machine.
Scanning From An Application Software You can scan an image from TWAIN- or WIA- (Windows XP only) compliant application software and use the image in that application software. This procedure varies depending on the application software. For the detailed procedure, refer to the manual of the application software you are using. Chapter 6 Scanning Images...
Chapter 7 Printing Photographs Directly From A Digital Camera Printing Photographs Directly From A PictBridge- Compliant Device Connecting a PictBridge-compliant device such as digital camera, camcorder or mobile phone to the machine allows you to print recorded images directly without using a computer. PictBridge is an industry standard enabling a range of digital photo Note solutions, including the direct printing of photos from compatible digital...
Connect the PictBridge-compliant device to the machine. (1) Connect the device to the machine using the USB cable (for connection to a computer) supplied with the device. (2) Turn ON and set up the device for direct printing. When the connection between the device and machine has been established, <CAMERA DIRECT>...
This paper is exclusively used to print photo stickers. When printing on sticker paper, select “10x15 cm/4" x 6"” in “Page size”. This size can be selected only for Canon PictBridge compatible devices (note that it cannot be selected for some models).
<IMAGE ENHANCEMENT> settings mode using the controls of the machine (MP180). If you use a Canon PictBridge-compliant device, you can select “VIVID”, “NR”, “VIVID+NR” or “FACE”. (Note that these options cannot be selected for some models.) Note About “Date/File No.
Chapter 8 Changing The Machine Settings (MP180) Changing The Settings This section describes the procedure to change the settings in the <SYSTEM SETTINGS> menu, taking the steps to specify <EXTENDED AMOUNT> as an example. Press [ON/OFF] to turn ON the machine. (See page 14) Press [Menu] repeatedly until <SYSTEM SETTINGS>...
PICTBRIDGE SET PAGE SIZE Selects the paper size: 8.5"x11"/A4/B5/A5/4"x6"/5"x7"/CREDIT CARD SIZE MEDIA TYPE Selects the paper type: PLAIN PAPER/PHOTO PAPER PRO/PHOTO PAPER PLUS/MATTE PHOTO PAPR/GLOSSY PRINT QLTY Selects the print quality: STANDARD/HIGH BORDERLESS PRINT Selects bordered or borderless print: ON/OFF IMAGE ENHANCEMENT Selects whether to optimize photos or not: SKIP/SET (VIVID/POP/REMOVE NOISE/FACE BRIGHT) (See page 48)
RESTORE DEFAULT Changes the settings back to the default, except for the language for LCD messages and the position of the FINE Cartridge: YES/NO SAVE CONFGURATION Saves the current media settings for the size, type, quality, magnification, intensity and image optimize: YES/NO LOAD CONFGURATION Loads the saved media settings: YES/NO...
Chapter 9 Routine Maintenance Replacing A FINE Cartridge If there is no improvement with the quality of printing following such maintenance as FINE Cartridge Cleaning, one of the FINE Cartridges is probably empty. Replace the empty FINE Cartridge with a new one.
Remove the empty FINE Cartridge. (1) Push the FINE Cartridge down. (2) Remove the FINE Cartridge. Important Do not touch the transparent film (A), film cable (B), ink absorber (sponge Caution part) (C), or any metal parts. Routine Maintenance Handle FINE Cartridges carefully to avoid staining your clothes or the surrounding work area.
Prepare a replacement FINE Cartridge. * To the Cartridge Holder. (1) Unpack a new FINE Cartridge and remove the Protective Tape. Important Insert the new FINE Cartridge. Black FINE Cartridge should be installed into the left holder (B) and Color FINE Cartridge should go into the right holder (C).
See “Aligning The FINE Cartridge” on page 79. Important Routine Maintenance To maintain optimal print quality, we recommend that you use Canon brand FINE Cartridge. Replenishing ink only is also not recommended. Replace the FINE Cartridge promptly. Do not leave with the FINE Cartridge removed.
Knowing When To Replace A FINE Cartridge It is important to identify the empty Cartridge using the LCD/LED and replace it. Should missing characters or white streaks appear despite sufficient ink Note levels, see “When Printing Becomes Faint Or Color Is Incorrect” on page 75.
[View Printer Status]. Canon IJ Status Monitor appears. It also appears automatically during printing. Open the [Canon IJ Printer Utility] dialog box, and then select [Ink Level Information] from the pop-up menu. When the “!” mark appears on the Low Ink Warning The ink level of the FINE Cartridge showing the “!”...
Setting of FINE Cartridges Note If a FINE Cartridge runs out of ink, you can print with either the Color or Black FINE Cartridge only for a while. However the same printing quality cannot be expected, compared to printing with both cartridges. The [Black only] setting can be used when you select [Plain Paper] in [Media Type].
When the “?” mark appears on the Low Ink Warning If you install an old FINE Cartridge, the “?” icon appears for the FINE Cartridge in question. In this case, the remaining level of ink cannot be calculated correctly. We recommend that you replace the FINE Cartridge with a new one.
When Printing Becomes Faint Or Color Is Incorrect When printing becomes faint or colors are incorrect, the FINE Cartridge Nozzles are probably clogged. Follow the procedures below to clean these nozzles. Before Performing Maintenance Note Remove the FINE Cartridge once, then reinsert it into place. See “Replacing A FINE Cartridge”...
Printing The Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink is being ejected properly from the FINE Cartridge Nozzles. Use this function when the printed results are blurred or the color is incorrect. Printing The Nozzle Check Pattern Load A4- or Letter-sized plain paper in the Auto Sheet Feeder.
Confirming The Nozzle Check Pattern This section describes how to confirm the nozzle check pattern and the FINE Cartridge position pattern. If the ink level is low, the nozzle check pattern is not printed correctly. If Note the ink level is low, replace the relevant FINE Cartridge. (See page 67) If the lines are broken (1), or white lines (2) are present in the pattern (A), clean the FINE Cartridge.
] to select <DEEP CLEANING>. 8.MAINTENANCE DEEP CLEANING Press [OK]. Press [Maintenance] repeatedly until <y> appears. Press [Black] or [Color]. If FINE Cartridge Deep Cleaning does not improve the print quality, Note contact a Canon service representative. Routine Maintenance Chapter 9...
Aligning The FINE Cartridge If ruled lines are misaligned or a printout is unsatisfactory, FINE Cartridge Alignment is required. Aligning The FINE Cartridge Press [Menu] repeatedly until <MAINTENANCE> appears. Use [ ] or [ ] to select <ALIGN PRINT HEAD>. Press [OK].
Load the checked sheet on the Platen Glass. When loading the checked sheet, place the front side down, and align the upper left corner of the sheet with the alignment mark on the lower right corner of the Platen Glass. Press [OK].
Cleaning Your Machine This section describes the necessary cleaning procedures for your machine. Be sure to turn OFF the power and disconnect the power cord before cleaning Caution the machine. Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the components or generate static charges.
Repeat steps 2 to 3 three times. The sheet of paper is automatically fed in and then out of the machine. If there are no signs of improvement after performing three times, contact a Note Canon service representative. Routine Maintenance Chapter 9...
Cleaning The Bottom Plate If the printed paper is smudged, the inside of the machine may be dirty. Periodic cleaning of certain parts on the inside of your machine is recommended to maintain a high standard of printing quality. The parts can be cleaned in the following ways: See “Cleaning The Bottom Plate”...
Proceed steps 1 to 3 for MP180 on page 83. Press [Maintenance] repeatedly until <J> appears. Press [Black] or [Color]. Inspect the discharged paper. If dust or dirt can be seen on the paper, repeat the cleaning process. If the discharged paper still appears dirty after you have run this cleaning Note process, the inside of your machine is probably extremely dirty.
Chapter 10 Troubleshooting This chapter provides troubleshooting tips for problems you may encounter when using the machine. This section provides troubleshooting tips for the most common printing Note problems. If you cannot find appropriate tips for your problem, refer to the on- screen manuals.
The function for detecting the remaining ink level will be disabled since the remaining ink level cannot be correctly detected. If you want to continue printing without this function, press [OK]. Canon recommends to use new genuine Canon Cartridges in order to obtain optimum qualities. Chapter 10...
After a while, plug the power cord of the machine back in and turn ON the machine. If the same error occurs, contact a Canon service representative. Action Reload the paper correctly and press [Black] or [Color].
If you want to continue printing without this function, press [Black] or [Color]. Canon recommends to use new genuine Canon Cartridges in order to obtain optimum qualities. The size of the document cannot be correctly detected or the document is too small when the Fit-to-Page copying is selected.
Ink Does Not Come Out/Printing Is Blurred/Colors Are Wrong/White Streaks/Straight Lines Are Misaligned/Cannot Print To End Of Job Cause FINE Cartridge is empty. FINE Cartridge is not installed correctly. Incorrect paper type. FINE Cartridge nozzles clogged or shifted. Print Quality is not set properly. Media not loaded printside up.
Open the Paper Output Tray. Restart your computer. It may solve the problem. Delete an undesired print job, if there is any. Use Canon IJ Status Monitor in Windows or [Printer Setup Utility] (or [Print Center]) in Macintosh for the deletion.
Cause The size of the print data is too large. The hard disk does not have enough available space. When Copying Cause The document is not loaded correctly. The quality (image quality) displayed on the LCD is not suitable for the document.
Back Of Paper Is Smudged/Paper Does Not Feed Properly/Printed Surface Is Scratched Cause Inside of the machine is dirty. Paper feed roller is dirty. Troubleshooting Action If the inside of the machine is dirty, printed paper may be smudged. Follow the steps described below to clean the inside of the machine. 1.
Ensure that paper is loaded correctly. Slide the paper guides against the paper stack. Action Use Photo Paper Pro or other Canon genuine media to print images that have a high color saturation. See “Paper Types You Cannot Use” on page 16.
If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact a Canon service representative. Important You cannot load Credit Card-sized paper in the landscape orientation.
Cannot Print Properly From A Photo Index Sheet (MP180) Cause <SCAN ERROR> is displayed. An Unintended Language is Displayed on the LCD (MP180) Cause The language you want to be displayed is not selected. Chapter 10 Action Make sure all required boxes on the Photo Index Sheet are filled in, and that the sheet is set in the correct position and orientation on the Platen Glass.
This section describes errors that are indicated on Canon-brand PictBridge- compatible cameras. The error messages and operations may vary depending on the camera you are using. If you are using a non-Canon PictBridge compatible camera and not sure how to clear the error from the camera, confirm the message displayed on the LCD of the machine and clear the error.
However, because printing is disabled once the ink absorber becomes completely full and until the ink absorber is replaced, you are recommended to contact a Canon service representative as early as possible. Prepare a new FINE Cartridge. Select Continue in the display on your camera to resume printing.
CD-ROM icon. Double-click the CD-ROM icon on your desktop to start installation. If the CD-ROM icon is not displayed on the desktop, there is a problem with the CD-ROM. Contact a Canon service representative. Troubleshooting Action Chapter 10...
Cause You have a defective Setup If you have a defective Setup CD-ROM, please consult your sales or service CD-ROM. representative. Make sure the CD-ROM is readable from Windows Explorer. Reconfirm that the CD-ROM icon is displayed when you insert the CD-ROM. Installation procedure not Follow the Easy Setup Instructions packaged with your machine for proper MP followed correctly.
When You Connect To A Computer Running Windows XP, The Screen Shows The Warning Message “High-SPEED USB Device Plugged Into Non-High-SPEED USB Hub” Cause You connect to a computer Your environment is not fully compatible with USB 2.0. that does not support USB See “Printing Speed Is Slow / USB 2.0 Hi-Speed Connection Does Not Work”...
Computer Stops Operating During Scanning Cause Output Resolution set too Reboot the computer, lower the Output Resolution and rescan. (See the Scanning high. Guide) Insufficient hard disk space. Multiple devices connected Disconnect all other devices but the machine from the port. to the USB port.
Parts Of Image Missing Or Surrounded By Extra White Areas Cause Scan area was specified Specify the scan area appropriately. larger than the original. If you click the Auto crop button of the ScanGear, the scan area is adjusted automatically to match the size of the original. When scanning an original surrounded by white borders such as a photo print, of if you otherwise want to specify a custom scan area, specify the scan area manually.
“There Is Not Enough Memory.” Message Is Displayed Cause There is not enough Exit any application that are running, and try to run this program again. memory to continue scanning. Scanned Image Is Not Displayed Properly Cause Scanned image prints out Set the printing size in the application program.
3. Open the [File] menu and select [Properties]. 4. Click the [Ports] tab (or the [Details] tab) to confirm the port settings. A USB port is selected if either USBnnn (Canon MP180/MP160) or MPUSBPRNnn (Canon MP180/MP160) (where n is a number) is indicated.
Press [OK] to cancel the error so that you can continue printing. Once the ink absorber becomes completely full, printing cannot be done until the ink absorber is replaced. Canon recommends to contact a Canon service representative as soon as possible. Error No.: 2001 Is Displayed...
For Windows Users Cause The [Instructions] button is The [Instructions] button on the printer driver screen is not displayed if the On- not displayed on the printer screen Manual is not installed. Set the Setup CD-ROM in your computer and install driver screen.
If you cannot solve the problem with any of the workarounds in this chapter, please contact the seller of the machine or a Canon service representative. Canon support staff are trained to be able to provide technical support to satisfy customers. Attempts by customers to repair or take apart the machine will invalidate any Caution warranty regardless of whether the warranty has expired.
* This is available in A4/Letter, 4" x 6" /101.6 x 152.4 mm, 4" x 8" /101.6 x 203.2 mm, 5" x 7"/127.0 x 177.8 mm and Credit Card paper sizes (MP180). Recommended printing Canon recommends that you print within this area. ( area: Printable area: The area where it is possible to print.
A4, B5, A5, 4" x 6", 4" x 8", 5" x 7", Credit Card Size 4" x 6"/101.6 x 152.4 mm 4" x 8"/101.6 x 203.2 mm 5" x 7"/127.0 x 177.8 mm Credit Card Recommended printing area Printable area When Printing on Glossy Photo Paper GP-401/GP-501/Matte Photo Note Paper MP-101/Photo Paper Plus Double Sided PP-101D/Photo Paper...
Letter, Legal Size Letter Legal Recommended printing area Printable area When Printing on Glossy Photo Paper GP-401/GP-501/Matte Photo Note Paper MP-101/Photo Paper Plus Double Sided PP-101D/Photo Paper Plus Glossy PP-101/Photo Paper Plus Semi-gloss SG-101/SG-201 and Photo Paper Pro PR-101, selection of “Borderless Printing” enables you to make prints with no margins.
Follow the steps described below to uninstall the installed on-screen manuals from your computer. Note that this uninstall procedure will uninstall all guides. Click [Start], select [All Programs] (or [Programs]), [Canon MP180 Manual/MP160 Manual] and [Uninstall]. When the uninstall message appears, click [OK].
Transporting The Machine When relocating the machine or storing the machine for prolonged periods, pack the machine using the original packing materials. If you do not have the original packing materials, pack the machine carefully using protective material and a sturdy box. Turn the machine OFF and unplug the machine.
MP160: Approx. 6.3 kg (13.9 lb) Standard Canon FINE Cartridges Black: Canon FINE Cartridge PG-40 Color: Canon FINE Cartridge CL-41 High Yield Canon FINE Cartridges (Option) Black: Canon FINE Cartridge PG-50 Color: Canon FINE Cartridge CL-51 Nozzles Black: 320 nozzles (600 dpi)
Photo Paper Plus Semi-gloss A4/Letter, Glossy Photo Paper A4/Letter, Plain Paper A4/Letter) 5.4 x 8.6 cm/Credit Card (Glossy Photo Paper Card Size) Canon-brand sticker. Printing on this paper is available only when the Layout function on your camera has a 16-up option. See “Recommended Paper” on page 17.
Available hard-disk space for printer driver installation Windows XP/Windows 2000/Windows Me/Windows 98: Approx. 550 MB Canon IJ Status Monitor cannot be used under the following conditions: – When sharing this machine on a network (Windows Me, Windows 98) Chapter 11...
Additional Systems Requirements for On-screen Manuals Browser: Windows HTML Help Viewer * Microsoft Internet Explorer 5.0 or later must be installed. The on-screen manual may not be displayed properly depending on your operating system or Internet Explorer version. We recommend that you keep your system up to date with Windows Update.
Warning specified in this guide. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. TEL No. 1-516-328-5600 Chapter 11 Appendix...
Separate Warranty. Non-Canon brand equipment and software that may be distributed with the Product are sold "as is" and without warranty of any kind by Canon USA, including any implied warranty regarding merchantability or fitness for a particular purpose, and all such warranties are disclaimed.
BY THE USE, MISUSE, OR INABILITY TO USE THE PRODUCT REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA OR ITS ASF HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA OR ITS ASF BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT CAUSING THE ALLEGED DAMAGE.
InstantExchange Service ** A Canon Customer Care Center or ASF technician will attempt to diagnose the nature of the problem and, if possible, correct it over the telephone. If the problem cannot be corrected over the telephone, and you elect the InstantExchange option, a reference number will be issued to you. You will be asked for the Product serial number and other information pertaining to your defective Product and for a ship-to location for the replacement Product (must include street address).
Free live technical support Mon - Fri 9am-8pm EST (excluding holidays) for products still under warranty (1-800-OK-CANON) The location of the authorized service facility nearest you (1-800-OK-CANON) If the problem cannot be corrected by using one of the above technical support options, repair options are available at the time of your call to the Free live technical support number above or via the website at www.canon.ca...
Index (-) and (+) Buttons 12 + Button 13 Access Lamp 11 Advanced Copy Functions 32 Borderless Copying (MP180) 33 Fit-to-Page Copying (MP160) 35 Image Repeat (MP180) 34 Sticker Copying (MP180) 32 Alarm Lamp (MP160) 13 Alarm Lamp (MP180) 12 Auto Sheet Feeder 10 Back Button 12 Black Button (MP160) 13...
Photo Index Sheet 39 Print Settings 48 Single-Photo Print 44 Sticker Print 46 Recommended Paper 17 Regulatory Information 117 Routine Maintenance 67 FINE Cartridge Alignment 79 FINE Cartridge Cleaning 78 FINE Cartridge Deep Cleaning 78 Replacing A FINE Cartridge 67 Safety Precautions 3 SCAN Button (MP160) 13 SCAN Button (MP180) 12...
This product uses the following copyrighted software: exit.c Copyright © 1990 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.
Call 1-800-OK-CANON to locate a dealer near you, or visit the Canon eStore at www.estore.usa.canon.com. © 2006 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may be a registered trademark or trademarks in other countries. All other product and brand names are trademarks of their respective owners.
The following FINE Cartridges are compatible with this machine. The following FINE Cartridges (High Yield) are also compatible with this machine. For details on FINE Cartridge replacement, refer to “Replacing A FINE Cartridge” in this guide. QT5-0546-V05 XXXXXXXX ©CANON INC. 2006 PRINTED IN VIETNAM...