Canon Colorado 1650 Operation Manual page 275

4. Tap on [IPv4] to change the TCPIP v4 parameters.
5. Tap on [IPv6] to change the TCPIP v6 parameters.
6. Tap on Save to save the settings. It is recommended to restart the engine to make sure the
settings are activated.
7. Tap on the [Back] arrow.
8. Tap on [Remote services]. One of the settings you can change are the [Proxy settings].
NOTE
A proxy may be required to access the internet and make use of Remote services. Ask
your IT administrator for the settings, if he does not know them use the default values.
9. Tap on [Save] to save the settings.
Chapter 8 - Configure the network and security settings
Configure the network
275