Canon Colorado 1650 Operation Manual page 48

Copy an existing media profile and edit it in ONYX
11. Give the media a new [Media Type Name] and click on [Ok]. The window closes.
NOTE
Check that the media type name is changed. Default it should be the same as the media
profile name. You can also choose a different media type name, as long as it is unique.
Also check all the other settings.
12. Click on the 'Next' icon to follow the steps.
13. You can select the print mode under [Add/ Edit Modes]. For more information, see
mode on page
14. You can change the specific print mode settings under [Basic Print Mode Settings].
NOTE
Fill in the same name as the selected print mode to avoid confusion.
15. Click on [Mode options]. A new window opens.
16. You can change the rest of the media settings. For more information, see
settings on page
17. Click on [Ok]. The window closes.
18. Finish all the steps to create the media profile.
48 Chapter 4 - Handle the media
75.
65.
Select a print
Change the media