Canon Colorado 1650 Operation Manual page 218

Replace the wiper
4. Move to the media input side and wait till the carriage has moved into position.
5. Put on the Colorado 1650 approved gloves.
6. Open the top cover.
7. Clean the platen. For more information, see
8. Locate the maintenance station with the wiper on the right hand side.
9. Hold the wiper with your left hand and use your right hand to pull the wiper holder on the right
(1). Take the wiper out (2).
CAUTION
Be careful to touch, the wiper can be hot. Let the wiper cool down for five minutes.
10. Dispose the wiper as chemical waste according to local regulations.
11. Clean the maintenance station and clean wall. For more information, see
station, wiper and clean wall on page
NOTE
Perform the action from step 5, do not exit the 'Clean the wiper' window.
218 Chapter 6 - Maintain the system
Clean the platen on page
184.
197.
Clean the maintenance