Load Media With The Media Input Unit - Canon Colorado 1650 Operation Manual

Load media with the media input unit

Introduction
In this topic you will find information on how to load the media from an external device into the
Colorado 1650.
Before you begin
• Check the media up-front (small roll).
Calibration can be performed on the media loaded on an external device.
• Load the media roll centered onto the core on the external device.
NOTE
• Load the media for outside printing is preferred.
• Print quality is guaranteed after 1 meter (39.4 inch).
When the media is taped to the take-up roll.
Procedure
1. Place a marker on the frame of the Colorado 1650 media input unit to identify the width of the
media (for example a piece of tape).
Load media with the media input unit
Chapter 4 - Handle the media 113