Calibration Data - Xylem YSI MultiLab 4010P-1 Operation Manual

MultiLab 4010-1
Displaying the

calibration data

ba76141e03 03/2014
5.2.6 Calibration data
The calibration record is automatically transmitted to the interface
after calibrating.
The calibration record of the last calibration is to be found under the menu item,
Calibration / Calibration record. To open it in the measured value display, press
the <CAL__> key.
The calibration records of the last 10 calibrations are to be found in the menu,
Calibration / Calibration data storage / Display. To open the Calibration menu,
press the <MENU/ENTER> key in the measured value display.
Menu item
Calibration /
Calibration data stor-
age /Display
Calibration /
Calibration data stor-
age /
Output to RS232/USB
Setting/func- Description
tion
- Displays the calibration records.
Further options:
 Scroll through the calibration
records with <><>.
 Output the displayed calibration
record to the interface with
<F2>/[USB output].
 Output all calibration records to
the interface with <F2__>[USB
output].
 Quit the display with <F1>/
[Back] or <MENU/ENTER>.
 Switch directly to the measured
value display with <M>.
- Outputs the calibration data stor-
age to the interface
pH value
37