Automatic Data Storage At Intervals - Xylem YSI MultiLab 4010P-1 Operation Manual

Data storage
Configuring the
automatic data
storage function
Settings
74

10.2 Automatic data storage at intervals

The data storage interval (Interval) determines the time interval between auto-
matic data storage processes. Each data storage process transmits the current
dataset to the USB interface.
1. Press the <STO__> key.
The menu for automatic data storage appears.
Automatic data storage
ID number
Interval
Duration
continue
0d03h00min
0
Back
1 Adjusted entire data storage duration
2 Max. available data storage duration
3 Graphical display of the data storage usage
You can configure the automatic data storage function with the following set-
tings:
Menu item Possible setting
ID number 1 ... 10000
Interval 1 s, 5 s, 10 s,
30 s, 1 min,
5 min, 10 min,
15 min, 30 min,
60 min
Duration 1 min ... x min
1
30 s
180 min
1d17h33min
03.04.2013
08:00
Description
ID number for the dataset series.
Storage interval.
The lower limit of the storage interval
can be restricted by the number of free
storage locations.
The upper limit is restricted by the stor-
age duration.
Storage duration.
Specifies after which time the auto-
matic data storage should be termi-
nated.
The lower limit of the storage duration
is restricted by the storage interval.
The upper limit is restricted by the
number of free storage locations.
MultiLab 4010-1
1
2
3
ba76141e03 03/2014