Data Storage; Manual Data Storage - Xylem YSI MultiLab 4010P-1 Operation Manual

MultiLab 4010-1
If the data storage is
full
ba76141e03 03/2014
10

Data storage

You can save measured values (datasets) to the data storage:
 Manual data storage (see section 10.1 M
 Automatic data storage at intervals (see section 10.2 A
, page 74)
AGE AT INTERVALS
Each data storage process transmits the current dataset to the USB interface.

10.1 Manual data storage

You can save a measurement dataset to the data storage as follows. The data-
set is at the same time output to the USB interface:
1. Press the <STO> key shortly.
The menu for manual data storage appears.
Manual data storage 4 von 500
03.04.2013 07:43:33
pH 7.000 24.8 °C AR +++
ID number:
continue
03.04.2013
Back
08:00
2. If necessary, change and confirm the ID number (1 ... 10000) with
<><> and <MENU/ENTER>.
The dataset is stored. The meter switches to the measured value dis-
play.
When all data storage locations are occupied, it is not possible to continue stor-
ing. Then you can e.g. transmit the stored data to a PC (see section 10.3.1
E
DITING THE MEASURED VALUE DATA STORAGE
the data storage (see section 10.3.2 E
, page 77).
AGE
ANUAL DATA STORAGE
UTOMATIC DATA STOR
1
, page 76) and subsequently erase
RASING THE MEASUREMENT DATA STOR
Data storage
, page 73)
-
-
73