Maintenance, Cleaning, Disposal; Maintenance; General Maintenance Activities; Replacing The Batteries - Xylem YSI MultiLab 4010P-1 Operation Manual

Maintenance, cleaning, disposal

86
13 Maintenance, cleaning, disposal

13.1 Maintenance

13.1.1 General maintenance activities

The only maintenance activity required is replacing the batteries.
See the relevant operating manuals of the IDS sensors for instruc-
tions on maintenance.

13.1.2 Replacing the batteries

You can operate the meter either with normal batteries or with
rechargeable batteries (Ni-MH). In order to charge the batteries, an
external charging device is required.
1. Open the battery compartment (1) on the underside of the meter.
1
1 Battery compartment
CAUTION
Make sure that the poles of the batteries are positioned cor-
rectly.
±
The signs on the batteries must correspond to the
the battery compartment.
2. Place four batteries (type Mignon AA) in the battery compartment.
3. Close the battery compartment (1).
4. Set the date and time (see section 4.5.5 E
S
ETTING THE DATE AND TIME
XAMPLE
, page 26).
MultiLab 4010-1
±
signs in
2 :
ON NAVIGATION
ba76141e03 03/2014