Multilab 4010P-1 Meter With Integrated Printer; Sensors; Ids Sensors - Xylem YSI MultiLab 4010P-1 Operation Manual

Overview
8
1.2

MultiLab 4010P-1 meter with integrated printer

The integrated printer of the MultiLab 4010P-1 enables to document measure-
ments according to GLP requirements.
The information concerning the printer of the MultiLab 4010P-1 is
given in a separate chapter (see section 12 P
M L 4010P-1), page 83).
ULTI AB
5
1 Keypad
2 Display
3 Socket field
4 Printer
5 Control panel of the printer
1.3

Sensors

A measuring system ready to measure consists of the MultiLab 4010-1 meter
and a suitable sensor.
Suitable sensors are IDS pH sensors, IDS ORP sensors, IDS conductivity
sensors and IDS D.O. sensors.

1.3.1 IDS sensors

IDS sensors
 support the automatic sensor recognition
 show only the settings relevant to the specific sensor in the setting menu
 process signals in the sensor digitally so that precise and interference-free
measurements are enabled even with long cables
 facilitate to assign a sensor to a measured parameter with differently colored
couplings
RINTER
4
MultiLab 4010-1
(
ONLY
3
2
1
ba76141e03 03/2014