Printer (Only Multilab 4010P-1); Commissioning / Switching The Printer On Or Off - Xylem YSI MultiLab 4010P-1 Operation Manual

MultiLab 4010-1
Switching on the
printer
Switching off the
printer
ba76141e03 03/2014
12

Printer (only MultiLab 4010P-1)

2
1
1 Operating LED
– Illuminated: Printer is switched on
– Flashing: Printer is switched off
2 Control panel with the keys <ON/FEED> and <OFF>
3 Lever to open the paper compartment
4 Lid of the paper compartment

12.1 Commissioning / switching the printer on or off

1. Connect the power pack to the MultiLab 4010P-1.
The LED lights up green. The printer is ready for operation.
or
If the printer was switched off (LED flashing):
Switch on the printer with <OFF>.
The LED lights up green. The printer is ready for operation.
If there is a USB connection (such as to a PC) the data are output
only to the PC.
1. Switch off the printer with <OFF>.
The LED flashes. The printer is switched off.
Printer (only MultiLab 4010P-1)
3
4
83