Options For Data Transmission To A Pc; Multilab Importer - Xylem YSI MultiLab 4010P-1 Operation Manual

Transmitting data (USB interfaces)
80

11.4 Options for data transmission to a PC

Via the USB-B interface you can transmit data to a PC. The following table
shows which data are transmitted to the interface in which way:
Data Control
Current manual
measured val-
ues of all con-
nected
sensors
automatic, at
intervals
Stored mea- manual
sured values
Calibration manual
records
automatic
The following rule applies: With the exception of the menus, shortly
pressing the <F2>/[USB output] key generally outputs the display
contents to the interface (displayed measured values, measuring
datasets, calibration records).

11.5 MultiLab Importer

With the aid of the MultiLab Importer software, you can record and evaluate
measuring data with a PC.
More detailed information can be found in the MultiLab Importer
operating manual.
Operation / description
 With <F2>/[USB output].
 Simultaneously with every manual
storage process (see section 10.1
M
ANUAL DATA STORAGE
 With <F2__>/[USB output].
Then you can set the transmission
interval.
 Simultaneously with every auto-
matic storage process (see section
10.2 A
UTOMATIC DATA STORAGE AT
, page 74).
INTERVALS
 Displayed dataset with <F2>[USB
output] after calling up from the data
storage.
 All datasets with the Output to
RS232/USB function.
(see section 10.3.1 E
MEASURED VALUE DATA STORAGE
page 76).
 Calibration record with <F2>/[USB
output] (see section 5.2.6 C
, page 37; section 7.2.6
TION DATA
C , page 51; section
ALIBRATION DATA
8.3.4 C
ALIBRATION DATA
 At the end of a calibration proce-
dure.
ba76141e03
MultiLab 4010-1
, page 73).
DITING THE
,
-
ALIBRA
, page 57).
03/2014