Table of Contents
Advertisement
3 • Consumables and Maintenance
Installing a
Replacement
Transfer Belt
3-6
6. Unpack the new transfer belt.
Grasp the blue handles and
lower the left side of the belt
into the printer, installing the
pins into the guides at the front
and back, then lower the right
side.
7. Push down on the belt latches
to lock the new belt in place.
8. Put the image drum/toner cartridge units back into the printer. Holding
each unit directly above its correct position in the printer, lower it into the
printer, making sure that it is correctly aligned. When aligned correctly, it
will easily fit into position without any additional pressure.
9. Close the top cover and turn the printer on.
SV62531 Rev. B
Advertisement
Table of Contents
