Table of Contents
Advertisement
Appendix B • Menu System
Menus
B-10
System Adjust (continued)
Item
Value
Error Report
ON
OFF
Print Position
X Adjust
Adjust
Y Adjust
Duplex X
Adjust
Duplex Y
Adjust
Description
ON: prints an error report
during the occurrence of
an internal error. This item
is valid only for PS and
PCLXL.
+/– 2 mm at
Adjusts the position
+/- .25 mm
of the whole printing
intervals.
image (0.25mm interval)
perpendicular to the
direction of paper movement
(i.e. horizontally).
+/– 2 mm at
Adjusts the position of
+/- .25 mm
the whole printing image
intervals.
(0.25mm interval) parallel
to the direction of paper
movement (i.e. vertically).
+/– 2 mm at
During the flip-side printing
+/- .25 mm
of duplex printing, adjusts
intervals.
the location of the whole
printing image (0.25mm
interval) perpendicular to the
direction of paper movement
(i.e. horizontally).
+/– 2 mm at
During the flip-side printing
+/- .25 mm
of duplex printing, adjusts
intervals.
the location of the whole
printing image (0.25mm,
interval) parallel to the
direction of paper movement
(i.e. vertically).
SV62531 Rev. B
Advertisement
Table of Contents
