Table of Contents
Advertisement
Installing a
Replacement
Image Drum
SV62531 Rev. B
3 • Consumables and Maintenance
1. Switch off the printer as described on page 2-2 and open the top cover.
2. When replacing an image drum, it is best to first remove the relevant
drum and toner cartridge as a unit before separating them. This method
ensures that the possibility of toner spillage into the printer is minimized.
3. Place a spare piece of paper onto the desk to protect it from any toner
spillage.
4. Lift the required image drum
and toner cartridge assembly
from the printer.
5. Turn the latch on the toner
cartridge counter-clockwise
and lift the cartridge clear of
the drum. Place the cartridge
to one side for reinstalling
later.
6. Recycle or discard the old
image drum in accordance
with local requirements.
7. Make sure the new drum is the
correct color and remove from
its bag.
8. Remove the protective sheet
and all other packaging from
the drum.
9. Lower the back end of the
toner cartridge into the image
drum first, then gently push
the front of the cartridge down
into place. Turn the toner latch
clockwise to lock the cartridge
into position.
10. Holding the image drum/toner cartridge unit directly above its correct
position in the printer, lower the unit into the printer, making sure that it
is correctly aligned. When aligned correctly, it will easily fit into position
without any additional pressure.
11. Close the top cover and turn the printer on.
3-3
Advertisement
Table of Contents
