Table of Contents
Advertisement
1 • Introduction
Trays and
Stackers
1-8
Tray 1
Tray 1 is the standard blank paper input tray and can hold up to 530 sheets
of 20 lb. (75 g/m²) paper.
Tray 1 can handle 20 -56 lb. (75 - 216 g/m²) paper.
If you have identical paper stock loaded in the MP Tray, you can have the
printer automatically switch to that other tray when the current tray runs
out of paper. This function can be enabled by driver settings when printing
from a Windows application or by a menu setting when printing from other
applications.
MP (Multi-purpose) Tray/Envelope Feeder
The multi-purpose tray is used for media sizes not handled by the standard
trays, heavier media weights and special media such as envelopes.
The multi-purpose tray can handle the same sizes as the standard trays but
in weights from 20 - 102 lb. (75 - 385 g/m²). For very heavy paper stock,
use the conveyor/face-up paper stacker. This ensures that the paper path
through the printer is almost straight.
The multi-purpose tray can feed paper from 5-1/8" (130.2 mm) to 13" (330.2
mm) wide, and from 4-1/8" (104.8 mm) to 22" (558.8 mm) long/high.
The media should be loaded print side up and top edge into the MP Tray. Do
not use the duplex (two-sided printing) function for envelopes.
Face-Down Stacker
The face-down stacker on the top of the printer can hold up to 500 sheets of
22 lb. (80 g/m²) standard paper, and can handle paper stocks from 20 -56 lb.
(75 – 216 g/m²). Pages printed in reading order (page 1 first) will be sorted
in reading order (last page on top, facing down).
Conveyor/Face-Up Stacker
The face-up stacker will eject the printed pages onto the conveyor. The
Face down stacker
SV62531 Rev. B
Advertisement
Table of Contents
