Table of Contents
Advertisement
The Control
Panel
SV62531 Rev. B
Up-arrow button
Enters menu mode and enables upward movement through the displayed
list of menu items.
Down-arrow button
Enters menu mode and enables downward movement through the
displayed list of menu items.
Back button
Returns to the previous higher level menu item.
Enter button
Enters menu mode and selects the menu item highlighted in the display
panel.
Online button
Switches between online (printer ready to receive data) and offline (printer
not ready to receive data).
Cancel button
Cancels current print job.
Help button
Provides additional textual or image data to supplement what is displayed
on the display panel.
Fuser Temp
This control adjusts the fuser temperature. It should normally be left at the
mid setting. If toner is not being correctly 'fixed' to thick material, increasing
the fuser temperature slightly might correct the problem.
Conveyor Speed
This setting can normally be left at the mid position. However, for extremes
of short or long material, adjusting the conveyor speed might be necessary
to provide good stacking on the conveyor.
MP Tray/Envelope Feeder up/down switch (below panel)
This switch raises and lowers the MP Tray/Envelope Feeder deck to allow
material loading.
FUSER
CONVEYOR
TEMP
SPEED
1 • Introduction
1-5
Advertisement
Table of Contents
