Table of Contents
Advertisement
Activating
Optional
Hardware
SV62531 Rev. B
If your printer has optional components (i.e., Duplexer or additional RAM),
they must be activated before they can be used.
Windows
1. Click [Start] → [Settings] → [Printers].
2. Right click the printer icon and go to [Properties].
3. Windows 2000 / XP / NT / Vista / 7 - Click the [Device Settings Tab]
and scroll down to [Installable Options].
Windows Me / 98 - Click the [Device Options Tab] and go to [Installable
Options] section.
4. Highlight and select installed options from the drop down menu.
5. Click [OK] to close the Properties window.
6. Options will now be available from within your applications.
Mac OS 9
1. Select [Chooser] from the Apple drop-down menu.
2. Highlight the AdobePS icon and your printer. Click [Setup].
3. Select [Configure] and select installed options from the drop down
menu.
4. Close [Chooser] and options will be available from within your
applications.
Mac OS X
Installable options configuration is only available on OS X 10.2 and above.
1. Open [Printer Setup Utility].
2. Highlight the printer and click [Show Info].
3. Click on [Name & Location] and select [Installable Options].
4. Highlight and select installed options from the drop down menu.
5. Click [Apply Changes] and close the [Printer Setup Utility].
6. Options will now be available from within your applications.
2 • Getting Started
2-11
Advertisement
Table of Contents
