System - Pitney Bowes DP40S Operator's Manual

Appendix B • Menu System
Configuration
B-4

System

Item Value
Serial Number xxxxxxxxxxxxxxx
Asset Number xxxxxxx
CU Version xx.xx
PU Version xx.xx.xx
Total Memory xx MB
Flash Memory xx MB [Fxx]
HDD xx.xx GB [Fxx]
Configuration Example - Monochrome Pages Printed
To display the total monochrome pages printed so far (remembering that a
duplex page counts as two pages):
1. Ensure that the display panel indicates that the printer is ready to print.
2. Enter menu mode by pressing either the Up-arrow or Down-arrow button
and press them repeatedly until the Configuration menu is highlighted.
3. Press the Enter button to select this menu.
4. Press the Up-arrow or Down-arrow buttons repeatedly until Print Page
Count is highlighted.
5. Press the Enter button to select this Item.
6. Press the Up-arrow or Down-arrow buttons repeatedly until Monochrome
Page is highlighted.
7. Press the Enter button and the monochrome page count is displayed.
8. Press the Online button to exit menu mode and return to the ready to
print status.
Description
Displays the printer serial number
Displays Asset Number. Asset
Number is 8 alphanumeric
characters that can be assigned by
a user.
Same as Asset Number of Menu
Map.
Displays the CU (Control Unit)
firmware version.
Same as CU version of Menu Map.
Displays the PU (Print Unit) firmware
version.
Same as PU version of Menu Map.
Displays total RAM installed in the
printer.
Same as Total Memory of Menu
Map.
Displays total flash memory installed
in the printer and version. Same as
Flash Memory of Menu Map.
Displays size of hard disk and file
system version.
Same as HDD of Menu Map.
SV62531 Rev. B