Pitney Bowes DP40S Operator's Manual page 37

Installing a
Replacement
Transfer Belt
SV62531 Rev. B
3 • Consumables and Maintenance
1. Switch off the printer as described on page 2-2 and open the top cover.
Caution
The fuser is very HOT after
the printer has been printing.
Be careful not to touch it.
2. Remove the four image
drums/toner cartridge units
and place them on a flat
surface.
3. Cover them with dark paper
or plastic to protect them from
light.
4. Lift the transfer belt latches to
release them.
5. Grasp the blue handles and lift
the transfer belt out. Dispose
of it in accordance with local
regulations.
Warning
Do not incinerate the used
transfer belt. It may explode
and cause a fire hazard.
3-5